Home > Power Inverter Charger >

12VDC 24VDC Mobile RV And Marine Boat BS1225 Booster Charger

Product Categories

TBB Power Co., Ltd.

Contact Now

Add to Cart

Booster and battery charger 12VDC 24VDC mobile RV and marine boat

Battery temperature compensation

Battery temperature is a key factor in correct charging, the charging formula must be adjusted

(automatically and in real time) according to the actual battery temperature to ensure that

battery are fully charged but not overcharged or undercharged.

All charging voltages recommended by battery manufacture are in fact only applied at 20℃ -

25℃.

Batteries will be permanently damaged by either overcharged or
remaining undercharged for any period of time.

Voltage compensated charging

Through the battery temperature and voltage sensor, BS charger could automatically adjust its

output compensating the voltage drop on the cable assuring the full charging through delivering

the right voltage to battery.

Features :

Active PFC featuring smaller and higher efficiency, max 92%.
With multiple isolated outputs
Charging program bulk-absorbtion-float-recycling
Automatically work as power supply or charger.
LFP (LiFePO4) charging algorithm is available.
Sophisticated TBB premium II multiple stages charging algorithm for lead acid battery.
Adaptive charging algorithm for multiple battery chemical including AGM,GEL, etc.
Automatic temperature compensation charging.
Automatic voltage compensation charging.
Programmable with monitor.
Night mode through remote control.

Specs

Model	BS1210	BS1225	BS1240	BS1225-3	BS1240-3
Electrical
Output voltage (PS mode) (Vdc)	12.8V±0.256Vdc
Max Output current (A)	10	25	40	25	40
Nominal input voltage (Vac)	85-265VAC,50/60Hz	165-265VAC,50/60Hz
Charge algorithms	5 steps. soft start, bulk, absorption, float, recycle
Temperature compensation	Automatically
Absorption voltage(Vdc)	AGM:13.5V,GEL:13.5V,LFP:13.5V,WET:13.7V
Floating voltage (Vdc)	AGM:14.4V,GEL:14.1V,LFP:14.4V,WET:14.7V
Charging current (A)	10	25	40	25	40
Min battery voltage (Vdc)	1	2
Efficiency	88%
Input connector	Cable of 1.5 meter with CEE 7/7 plug	IEC socket
Output connector	Fixed cable,2.5mm², 1 meter	M4 Screw (16mm²)
Output	1	1+1
Ripple noise	≤200mVp-p
Regulation Accuracy	≤2%
Cooling	Self cooling	Fan cooling
Working Temperature	-20℃ -- +60℃
Protection
Short circuit	Shutdown output, automatically restart when short circuit is removed
Reverse polarity	No charging
Charger over temp	Shut down the charger
Battery over temp	Shut down the charger
Standards
LVD	EN60335-1,EN60335-2-29
EMC	EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3
Structure
Out case	Aluminum+plastic
Dimension	17511453mm	24916574mm		24916574mm
Weight	1.0KG	1.6KG		1.6KG
IP class	IP20			IP23
Insulation Resistance	≥50MΩ
Dielectric strength	I/P-O/P:3.0KV,I/P-PG:1.5KV,O/P-PG:0.5KV

Installation

BS Charger can be installed on a horizontal surface or vertically on a wall. Please see following instruction;

Product Tags:

12v rv booster charger

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	TBB Power Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Power Inverter Charger products from this supplier

Find Similar Products By Category:

Electronic Components & Supplies

Hot Searches: